无奇不有 在PC上装Cisco PIX OS

　　PIX启动是考FLOOPY把IMAGE读到RAM里去的
　　Rebooting....
　　
　　如果把里面的82559网卡拿出那么他会检测不到硬件而不段REBOOT
　　
　　Cisco Secure PIX Firewall BIOS (3.6)
　　
　　Booting Floppy
　　..................................
　　PIX floppy loader (3.0) #0: Mon Oct 2 07:02:43 PDT 2000
　　Reading installation media.............
　　
　　PIX floppy loader (3.0) #0: Mon Oct 2 07:02:43 PDT 2000
　　Reading installation media.....................................
　　PIX admin loader (3.0) #0: Mon Oct 2 07:02:44 PDT 2000
　　Flash=i28F640J5

　　Flash version 4.4.7, Install version 4.4.7

　　Do you want me to install new version onto flash? [n] No

　　loading from flash...

　　128MB RAM

　　Flash=i28F640J5 @ 0x300

　　mcwa i82559 Ethernet at irq 11 MAC: 0002.b308.a0c6

　　mcwa i82559 Ethernet at irq 10 MAC: 0002.b326.1a09

　　pixfirewall# show int eth0

　　interface ethernet0 "outside" is up, line protocol is down

　　Hardware is “”“i82559”“”“ ethernet, address is 0002.b308.a0c6

　　IP address 127.0.0.1, subnet mask 255.255.255.255

　　MTU 1500 bytes, BW 10000 Kbit half duplex

　　0 packets input, 0 bytes, 0 no buffer

　　Received 0 broadcasts, 0 runts, 0 giants

　　0 input errors, 0 CRC, 0 frame, 0 overrun, 0 ignored, 0 abort

　　0 packets output, 0 bytes, 0 underruns

　　0 unicast rpf drops

　　0 output errors, 0 collisions, 0 interface resets

　　0 babbles, 0 late collisions, 0 deferred

　　0 lost carrier, 0 no carrier

　　pixfirewall#

　　ISA上的那快东西确定是FLASH无疑了

　　现在只要按照以下方法就可以把X86变成标标准准的一台PIX520了

　　下载rawrite.exe,pix529.bin,bh529.bin

　　C:>rawrite

　　RaWrite 1.2 - Write disk file to raw floppy diskette

　　Enter source file name: bh59.bin

　　Enter destination drive: a:

　　Please insert a formatted diskette into drive A: and press -ENTER- :

　　Number of sectors per track for this disk is 18.

　　Writing image to drive A:. Press ^C to abort.

　　Track: 11 Head: 1 Sector: 16

　　Done.

　　C:>0

　　然后就可以利用floopy进入monitor模式下

　　monitor> interface 1

　　0: i8255X @ PCI(bus:0 dev:14 irq:10)

　　1: i8255X @ PCI(bus:0 dev:13 irq:11)

　　Using 1: i82557 @ PCI(bus:0 dev:13 irq:11), MAC: 0002.b945.a23c

　　monitor> address 172.18.124.154

　　address 172.18.124.154

　　monitor> server172.18.125.3

　　server 172.18.125.3

　　monitor> file pix611.bin

　　file pix611.bin

　　monitor> ping 172.18.125.3

　　Sending 5, 100-byte 0xcde2 ICMP Echoes to 172.18.125.3, timeout is 4 seconds:

　　!!!!!

　　Success rate is 100 percent (5/5)

　　monitor> tftp

　　tftp pix611.bin@172.18.125.3..........................................

　　Received 2562048 bytes

　　Cisco Secure PIX Firewall admin loader (3.0) #0: Tue Dec 517:35:46 PST 2000

　　System Flash=E28F128J3 @ 0xfff00000

　　BIOS Flash=am29f400b @ 0xd8000

　　Flash version 6.1.1, Install version 6.1.1

　　Do you wish to copy the install image into flash? [n] y

　　Installing to flash

　　Serial Number: 480380761 (0x1ca20759)

　　Activation Key: 760754d0 39f62229 a4a0245f b5b87e80

　　Do you want to enter a new activation key? [n] n

　　Writing 2469944 bytes image into flash...

　　然后A：启动

　　.................

　　Firewall>enable

　　Firewall#

　　Firewall#

　　注意几点

　　1）安装的时候和OLIVE没区别，显示器上没进度条

　　2）安装的时候要有ISA或PCI接口的FLASH卡，最好是INTEL的

　　3）安装的时候PCI上要有2块82550系列的网卡